Adria jamstvo

1. Company warranty

1.1. Committed to excellence
 
At Adria Dom, we strive for sustainable development, production and marketing of highquality mobile homes. Our goal is to produce safe, functional and reliable products for customers wanting to spend some quality leisure time. From purchasing materials to selling the product, we do our best to prevent sources of mistakes, detect and eliminate any mistakes that may occur as soon as possible as well as constantly improving all the processes in the company. Our state-of-the-art production plant uses modern production processes and holds the ISO quality certificate (ISO 9001). The company provides a regular warranty for its products with reliable after-sales services from its own repairers as well as authorized repairers and a wide range of spare parts. Our mobile homes are manufactured in accordance with the EN 1647 standard.
 
1.2. General terms and conditions of warranty
 
2-year warranty*
The customer shall receive a full warranty (for components and work), which is valid for two (2) years from the date of purchase for any factory defects or hidden defects. The manufacturer is legally obliged to replace all the faulty parts free of charge. The manufacturer shall not guarantee the buyer any special features or ability to use the mobile home as declared in the EN 1647 standard.

7-year warranty*
Adria Dom also offers a seven (7) year warranty on certain assemblies or components of the mobile home, provided that the instructions for use and maintenance of the mobile home are fully complied with and that, according to pre-agreed rules, preventive inspections and appropriate activities are carried out by Adria Dom or its authorized repairers at the end of the season or before the start of the season (at least once a year). This warranty shall apply to the water-tightness and rusting of the structural elements of the roof, chassis, exterior panels and door and window frames. The material at the corrosive spot must not be physically damaged, as that reduces the corrosion resistance of the sheeting.

The customer must immediately, i.e. no later than 7 days after recording the defect, communicate all the detected deficiencies to the authorized representative of Adria Dom, otherwise the damage suffered indirectly shall not be the subject of the warranty claim. The manufacturer reserves the right to accept or reject the defect report. During the repairs, the customer is not entitled to any compensation for the inability to use the mobile home. The replaced parts and/or components shall remain the property of the manufacturer.

For appliances not manufactured by Adria Dom, all operating instructions and warranty cards shall be inserted into the User's Guide in the mobile home. The warranty period and conditions for the installed appliances are specified by the individual appliance manufacturer. Built-in appliances include: the hob (cooktop), refrigerator, water heater, electric heater, washing machine, oven, air conditioning, microwave, tapware, television and other optional built-in equipment. For other items/components, the manufacturer's warranty is limited to replacing or repairing individual items found to be faulty and to the work required for those repairs.
Adria Dom is not liable for direct or indirect damage or commercial detriment (including loss of profits or revenue) caused to persons or things, even if the damage is caused by a defect or malfunction in the material sold. Under no circumstances shall the manufacturer be liable for any accidents and/or injuries to people or things that may occur while using the mobile home, even if the event was caused by the defect itself.

The warranty does not cover parts and/or components that have deteriorated more quickly due to negligence or improper use, poor maintenance, overload or carelessness (water pipes, shower trays, shower enclosures, wet bathroom and kitchen cabinets, additional unintended connections of electrical devices). The warranty does not cover scratches on interior and exterior walls, doors and windows, PVC flooring, appliances and other equipment as identified after the handover. Furthermore, the warranty does not cover damages caused by the use of abrasives and solvents/dissolvers.

The liability of the manufacturer is, to the maximum extent permitted by applicable law, limited to the scope of the warranty defined in the previous indents.
In order to make a warranty claim, provide us with the following information when submitting the report:
• Description of the defect including pictures
• Product chassis number

To make a warranty claim on appliances not manufactured by Adria Dom, please contact the manufacturer of the individual appliance directly. To submit a report/claim you will require:
• Appliance type / model
• Appliance serial number
• Appliance item number
• Invoice proving the purchase of the mobile home

1.3. Warranty limitations
The warranty limitations and other exclusions of liability become part of the purchase agreement, i.e. part of the legal contract between the manufacturer/seller and the customer; if they are to become legally valid, these provisions are either written down in the contract or in the purchase order signed by the customer stating that he has received the general terms and conditions, where certain exclusions of liability can occur. In the event of selling to companies, the warranty offered by the manufacturer is the one contained in the sales and purchase agreement.

You cannot claim the warranty, i.e. the warranty is expressly excluded due to noncompliance with the manufacturer's instructions in the following cases:
• site preparation,
• loading and unloading,
• installation of the mobile home,
• water drainage,
• ventilation,
• preparing the unit for the winter,
• fixtures/installations and household appliances,
• due to improper maintenance or non-compliance with the manufacturer's maintenance instructions
• due to improper handling of original parts or fittings or unauthorised tampering with these parts/fittings
• in the event that the mobile home is not installed by the manufacturer or his authorised representative.
• due to intensive use of the mobile home (e.g. as a permanent residence or accommodation or a tourist facility or for purposes other than occasional use) or due to improper use of the product.

2. Important cautions (summary)
 
2.1. Delivery and testing
When connecting the electrical wiring of the mobile home to the main electric panel, it is important to check whether the earthing system has been installed and whether the phase and neutral conductors have been connected correctly. The connection to the electric panel and the test must be carried out by an authorized electrical installer.
For your own safety, be sure to check whether the vents are clear of any blockages before using your mobile home for the first time.
The standard models of Adria Dom mobile homes are not intended for extreme climatic conditions (low temperature, high relative humidity, wind speed, etc.). If you want to install your mobile home in an area where such weather conditions may occur, please consult your sales representative who will inform you of any necessary changes or adjustments.

2.2. Installations and household appliances
WATER
The mains water connection to the mobile home must be easily accessible, which must be taken into account when installing auxiliary facilities and chassis cladding.

DRAINS
Do not use aggressive cleaning agents that could damage the drains to unclog the drain pipes. Damages caused by the use of aggressive cleaning agents or physical damage are not covered by the warranty.
Pipes with a diameter of 110 mm and 40 mm are used for the installation of wastewater drainage.
In order to reduce friction when connecting drain pipes, only use the appropriate prescribed products; do not use oil or grease under any circumstance.

ELECTRICITY
Any changes to the electrical wiring may only be made by an approved electrical installer with the written confirmation of the mobile home manufacturer, otherwise any defects that may occur shall not be covered by the warranty, i.e. shall not be claimable.

GAS
Please note that covering or obstructing safety ventilation is prohibited, as is obstructing the gas cylinder compartment. If the mobile home comes equipped with a selector valve, it may only be installed by an approved fitter. If the gas pressure regulator is not an integral part of the gas installation itself, it must
be fitted right behind the gas cylinder in accordance with local legislation regarding the designated operating pressure. In the event of transporting the mobile home to another location, the gas cylinder must be shut off and physically removed from the gas cylinder compartment. Failure to heed these warnings will mean that any faults that may occur as a result will not be claimable under warranty. Any changes to the gas installation may only be made by an approved fitter.
In the event of wilful tampering with the gas installation, any defects or accidents resulting thereof shall not be claimable under warranty.

HOUSEHOLD APPLIANCES
We recommend that you check the functioning of any household appliance before using it for the first time.
If the appliance does not work, first check for the presence of electrical voltage in the distribution panel. If the household appliance still fails to operate, contact an authorised repairer listed in the warranty booklet for that particular appliance. In the event of any kind of tampering with the household appliances, any defects or
accidents resulting thereof shall not be claimable under warranty. In the event of a water leak due to incorrect installation of the refrigerator drain pan or water
leakage due to improper cleaning, the damage resulting thereof shall not be claimable under warranty. In the event of wilful tampering with the installations of household appliances, any malfunctions or accidents resulting thereof shall not be covered by or claimable under the warranty.

2.3. Maintenance
ENSURING ADEQUATE FLOOR VENTILATION
Moisture under the chassis can seriously damage the structural load-bearing capacity of the floor and other parts of the mobile home. In the event of floor damage due to moisture as a result of not heeding the above warning, this damage shall not be covered by or claimable under the warranty. In the event of embedding the mobile home or closing the outer rim, it is necessary to provide forced ventilation of the air space under the chassis. The required exchange of air is 300 m³/h.

ROOF
The roof is not a walking surface. Dirt must be removed from the gutters on a regular basis, as obstructions can clog the gutters, which can lead to water coming inside your mobile home. The mobile home must not be used if the load on the roof exceeds the prescribed load-bearing capacity. Remove excess load before entering the mobile home. Defects on equipment, walls or floors which are caused by water ingress resulting from not cleaning the gutters shall not be covered by or claimable under the warranty. Damage to the roof, walls, ceiling or other load-bearing elements resulting from excessive snow load due to the user's failure to clear the snow or other excessive load shall not be covered by or claimable under the warranty. In coastal areas, prolonged exposure to salty air can cause surface rusting on the chassis, exterior coverings, doors and windows and the roof. In order to avoid this issue, we recommend regular cleaning with a damp cloth or rinsing with a mild water jet. Surface rust is not claimable under warranty.

FURNITURE AND INTERNAL WALLS
Furniture, upholstered equipment and interior walls are cleaned with a damp cloth and non-aggressive cleaning agents that will not damage the coated particle boards, i.e. cause the fabric on the upholstered equipment to become discoloured. Do not place wet or damp cloths on the wooden parts of the furniture. If the furniture gets wet, it should be wiped dry immediately. Damage to the equipment resulting from not heeding the warnings herein shall not be covered by or claimable under the warranty.

SHOWER LINING AND SHOWER TRAY
Do not clean the shower lining and shower tray using cleaning agents that are intended for cleaning ceramic bathroom fittings or by using drain cleaners.
Should you notice any water leaks in the shower area, stop using it immediately and notify the manufacturer. Any damages caused by prolonged exposure to water are not covered under warranty.

2.4. Transportation
LOADING AND UNLOADING BY CRANE
It is prohibited to install steel cables of different lengths onto supports. Do not hang up the mobile home without the use of supports or by applying pressure to the
side walls.

SITE PREPARATION
If the mobile home is installed on a site where the slope is greater than 2.5%, there is a higher risk of the mobile home "slipping". This can lead to unwanted movements and possible damage to the interior fittings and/or structure. If the mobile home does not have proper drainage of rainwater, water mixed with mud/
sand/gravel can flow under the mobile home (due to the sloped terrain), which can cause damage to the mobile home in the long run. In the event of inadequate site preparation, the ground on which the mobile home is sited could suffer subsidence, which may lead to irreparable/repairable deformations, ingress of water into the interior, clogging of drains, sagging of equipment, doors and windows, furniture, etc. In this case, the warranty cannot be claimed.

2.5. Installation
CONNECTING THE INSTALLATIONS
Before the installation of cladding, auxiliary facilities and doing back-filling work around the mobile home, it is necessary to connect the wiring in the electrical boxes, i.e. run the conductors to an accessible distribution point on the outside part of the mobile home.

ADJUSTING DOORS, WINDOWS AND EQUIPMENT
After connecting all the installations, it is necessary to check their functionality:
• electrical devices (lights, cookers, heaters, air conditioners, water heaters, etc.) gas appliances (hob, water heater, etc.)
• checking that plumbing installations are leak-tight and unobstructed (tightening the sink traps, flow of cold and hot water, etc.)
• leak-tightness of sewage drains from the mobile home (drainage of wastewater from sink traps inside the mobile home and outflow into the sewage network)
Any faults with the electrical and gas appliances, and leaks in the plumbing occurring after the mobile home has been installed should be immediately reported to the manufacturer.

EXTERIOR
In the event of cladding the mobile home with wooden laths, you should always provide good ventilation (at least 20% of the outer rim surface) to prevent condensation.
If the bottom section (chassis) of the mobile home is closed, backfilled or enclosed with a wall, it is necessary to provide ventilation under the mobile home (an air flow of at least 300 m³/h). Due to maintenance work, it is essential to provide access – a service opening under the mobile home in the area of the water and electricity connections. The size of the opening should be at least 100 × 60 cm (length × width).

In the event of insufficient ventilation of the mobile home under the chassis, the manufacturer shall not accept any warranty claims for the potential damages caused by excessive moisture (deformities of structural elements). Make sure that the terrace roof is sloped away from the mobile home. If the rainwater from the terrace roof drains onto the mobile home, the manufacturer shall not cover any resulting damages that may occur.